Heating Mode; Fan Mode - Lg Um42F Manual Del Propietário

Heating Mode

This supplies warm wind to the inside of the building.
1 Turn the appliance on.
2 Press MODE button repeatedly to select the
Heating Mode.
• is displayed on the display screen.
3 Press or button to set the desired
temperature.
4 Press FAN SPEED button repeatedly to adjust the
fan speed.
NOTE
• Press the ROOM TEMP button to check the
Room temperature.
• When setting the desired temperature lower than
the room temperature, the unit will produce only
ventilation wind.
• Heating Mode is not available for Cooling only
models.
• To check the indoor temperature, press the room
temperature button.
Power Heating Mode
1 Turn the appliance on.
2 Press MODE button repeatedly to select the
Heating Mode.
3
Press JET MODE button.
• is displayed on the display screen.
NOTE
• Heating Mode is not available for Cooling only
models.
• Some functions may not be supported, depending
on the model.

Fan Mode

1 Turn the appliance on.
2 Press MODE button repeatedly to select the Fan
Mode.
• is displayed on the display screen.
3 Press FAN SPEED button repeatedly to adjust the
fan speed.
NOTE
• Natural wind based on chaos logic
- For a fresher feeling than other fan speeds,
press the Indoor Fan Speed Selector and set to
chaos mode. In this mode, the wind blows like a
natural breeze by automatically changing fan
speed based on the chaos logic.
• During Fan Mode
- The outdoor compressor doesn't work. Have a
function to circulate the indoor as it sends out
the air that doesn't have much temperature
difference with indoor.
Operating Instructions
Owner's Manual 13