LG UM42F Manual Del Propietário página 20

Operating Instructions
Energy Saving Cooling (Optional)
Energy Saving Cooling is the function to adjust the
desired temperature during cooling operation to
enhance the comfort of the user and improve the
energy saving performance.
• is displayed on the display screen.
NOTE
• It can be selected only during the cooling
operation.
• When pressing Energy Saving Cooling while
cooling at 22 °C or lower, it is automatically set to
22 °C.
• During the Energy Saving Cooling operation, the
temperature on the remote control may be
displayed differently from the air conditioner
display.
• Smart Mode / Energy Saving Cooling / Refresh
Mode functions cannot be set at the same time.
• Some functions may not be supported, depending
on the model.
20 Indoor Unit
Electric Heater (Optional)
It can only be set during heating operation.
• is displayed on the display screen.
NOTE
• The indoor unit displays during the heating mode,
the Auxiliary heater is automatically turned on, but
it is not displayed on the wireless remote
controller separately.
• It operates in Floor heating mode in Console
products.
• Heating Mode is not available for Cooling only
models.
• Some functions may not be supported, depending
on the model.
Comfort Cooling (Optional)
This function is automatically control the cooling
strength to maintain the pleasant feeling without
turning off the product after the indoor temperature
reached the desired temperature.
• is displayed on the display screen.
NOTE
• It can be selected only during the cooling
operation.
• Some functions may not be supported, depending
on the model.