LG UM42F Manual Del Propietário página 18

Operating Instructions
Using the Optional Function
Individual vane angle control
(Optional)
This is the function that controls the vane angles
individually in the ceiling cassette products.
1 Press VANE ANGLE button.
• The individual vane angle control symbol will
blink.
2 Set each vane angle by pressing VANE ANGLE
button.
3 Press SET/CLEAR button to set or cancel this
function.
NOTE
• There may be differences between the
up/down/left/ right buttons on the wireless remote
controller and the wind discharge port directions.
• Set the desired angle while checking the
movement and angle of the product's vanes.
• Some functions may not be supported, depending
on the model.
18 Indoor Unit
Air Purification / Plasma
Purification (Optional)
• Press AIR PURIFY or PLASMA button.
- is displayed on the display screen.
NOTE
• If you wish to stop, press AIR PURIFY or
PLASMA button again.
• When AIR PURIFY button is pressed while the
unit is stopped, Air Purification will start
independently.
• Plasma filter is a technology developed by LG to
get rid of microscopic contaminants in the intake
air by generating a plasma of highly charged
electrons. This plasma kills and destroys the
contaminants completely to provide clean and
hygienic air.
• This function can be used in any operation mode
and any fan speed can be used while the plasma
filter is functioning.
• Some functions may not be supported, depending
on the model.
Smart Indicator (Air Quality)
Always On Setting (Optional)
• Press the AIR PURIFY button for 3 seconds, Air
quality level will always be displayed on Smart
Indicator of the product.
NOTE
• Some functions may not be supported, depending
on the model.
LCD Luminosity Control
(Optional)
It is comfortable when you feel that the display of the
unit too bright.
• Press the button.