Starting The Measurement Procedure; Activating The Multifunctional Display; Stand-Alone Operation; Activating The Multifunctional Display (Network Connection) - Seca 651 Instrucciones De Uso

6.1

Starting the measurement procedure

Activating the multifunctional display (stand-alone operation)

Activating the multifunctional display (network connection)

102 • seca 651/650
Device mode
Basic
Advanced
Expert
Service
The multifunctional display will switch to standby mode
time, page 120) after a set time period. The following screensaver is displayed in

stand-alone operation:

1. Press the multifunctional display to activate it.
ð The main screen is displayed.
2. Ask the patient to step onto the weighing platform.
3. Complete the measurement as described in the relevant sections of these
instructions for use.
The multifunctional display will switch to standby mode
time, page 120) after a set time period. The following screensaver is displayed
with a network connection:
Function available
(è Setting standby
Screensaver for
stand-alone operation
(è Setting standby
Screensaver for
network connection
•
•
•
•