Fitting The Drip Tray; Operate Delivery Tap - Beem 3000 Manual De Instrucciones

Operation and function

Fitting the drip tray

EN

Operate delivery tap

52
The drip tray (11) must be installed before using the appliance.
Proceed as follows to install the drip tray:
Position the drip tray in front of the appliance so that the ar-
‹
row on the drip tray and the arrow on the appliance base are
aligned.
Lift the appliance slightly.
‹
Push the drip tray under the appliance so that the groove in
‹
the drip tray fits under the edge of the appliance base.
Lower the appliance again and the drip tray is clamped under
‹
the edge of the base.
Place the cover (12) onto the drip tray.
‹
To draw water from the water tank, proceed as follows:
Touch mode
Press the lever (17) downwards. The delivery tap (16) opens. To
close the delivery tap again, simply release the lever.
BEEM - Elements of Lifestyle