Ii-2-Fixing The Flap - Zodiac PRO 850 Manual Del Usuario

BUOYANCY MECHANISM - Fixing the Flap

II-2-FIXING THE FLAP

4
Fix the external flap using the stainless steel bars and bolts of the buoyancy mechanism
kit. Apply sealing compound on all the screws and in the hull holes to achieve final
tightness.
:
NOTE
The buoyancy mechanism is mounted on the hull deflated.
You may inflate the buoyancy mechanism disassembled (pressure
240 mb) and let it stabilize for approximately one hour. Then
deflate it.
If the buoyancy mechanism was stored at a temperature lower than
0 °C, leave it 12 hours at room temperature (20 °C) before folding
it.
11 / 47
E
N
G
L
I
S
H