Drilling Holes In The Door; Door Installation - Infiniton Wm-B84Awg Manual Del Usuario

Installation
English

Drilling holes in the door

1. Drill holes in the door in accordance with the fixed position paper.
2mm
35m m
2. Install the hinges and spacer.
Attach the hinges to the washer with the ST4 * 12 screws. The hinges can be adjusted to compensate for
any uneven door thickness.
Installation of magnets
This device is pre-set so that the door closes magnetically. For this device to work properly, it is neces-
sary to screw the counter magnet to the inside of the door.

Door installation

32
infiniton.es