Power Head - EGO HTA2000-FC Manual Del Operador

WARNING!
and cover the blade with the blade guard before moving the blade to the storage
position or from the storage position to the normal working position.
CONNECTING THE HEDGE
TRIMMER ATTACHMENT TO THE

POWER HEAD

This hedge trimmer attachment is
designed for use with EGO Power Head
PH1400/PH1400-FC/PH1420/PH1420-FC.
The hedge trimmer may be attached in
either the top-cutting or the side-cutting
position (Fig. 5). For detailed working
techniques, please see "WORKING
TECHNIQUES" section in this manual.
The hedge trimmer attachment connects to the power head by means of a coupler
device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
18
HEDGE TRIMMER ATTACHMENT — HTA2000/HTA2000-FC/HTA2020/HTA2020-FC
To reduce the risk of injury, always stop the tool, remove the battery,
5
Top-Cutting Position
Side–Cutting Position