Aiwa HS-RX748 Operating Instructions página 34

1 RADIO ON/BAND
PRESETTING [English |
You can preset 6 AM stations and 12 FM stations.
Automatic presetting
Stations are automatically scanned once through the receivable
frequency range and stored to each preset number (1 — 6). Up to
6 stations can be stored on each band (AM, FM1, FM2).
*Stations cannot be preset with the remote control. Set the
REMOTE switch to OFF and operate with the main unit.
1 Press the RADIO ON/BAND button repeatedly to select
AM, FM1 or FM2.
2 Keep the MODE/SET button pressed for about 1 second
until "PRESET" starts flashing in the display.
"PRESET" will flash for about 4 seconds.
3 Keep the TUNING UP/AUTO button pressed for 1 — 2
seconds.
@® Scanning starts.
4
@ When a station is tuned in, scanning stops. The tuned
station is heard for 3 seconds and preset. Then, scanning
Starts again.
L
@ When presetting is completed, the last preset station is
heard.
To listen to preset stations
Refer to page 40.
If flashing stops during operation
Repeat the procedure from step 2.