6. Charging the battery
WARNING!
BEFORE FIRST USE FULLY CHARGE SCOOTER
4
1
1. Only use the supplied charger when recharging your E-Scooter
2. Plug in the supplied charger to the mains (1) and the opposite end into
the charge port (2) in your E-scooter.
3. While charging a red light will be visible on the charger. Once fully
charged the light will turn green.
4. Power off the vehicle during charging.
5. If the battery is very low, the red light may not appear immediately, leave the
charger plugged in.
6. If the battery has not been charged in a long time (over a month) it is suggested to
leave the charger plugged in for 12-24 hours.
7. Remember to charge at least once every 3-6 months.
8. Keep the battery away from flammables. Be sure to place the charger on a non-
flammable surface during charging.
9. Only recharge in a cool, dry location
1
Plug into wall
2
Open door
3
Plug into scooter
4
Wait for red light
to turn green
2
3
7