Reboots GO Manual Del Usuario página 12

OPERATION
4
TURN ON DEVICE On the top you will find an On/Off switch.
Press and hold down the switch for 3 seconds to turn the
device on or off. If you are not able to turn on the device, then
battery is probably discharged. Use the included power cable
to recharge the device.
5
SELECT PROGRAM Program A is selected by default. Press
the "P" button to switch between programs A, B, and C.
6
SELECTING PRESSURE SETTING Pressure level 8 is
selected by default. By pressing the "+" or "-" buttons you can
adjust the pressure level between 1 and 16. By pressing and
holding the desired button, you can move through the
pressure selection options faster.
7
PLAY/PAUSE Start your program and pressure selection
by pressing the "Play/Pause" button.
Tip: if you press the "Play/Pause" button while a program is running,
you will pause the program for 2 minutes. If after these 2 minutes you do not
press "Play" again, the device will stop the program and air will
be released from the chambers.
8
STOP PROGRAM In order to stop a program
and let air escape, press the "Play/
Pause" button for 3 seconds.
4
5
6
7
8
12