Steam Dispensing - Faema President A-Gti Uso E Instalacion

18. Steam dispensing

Scalding hazard
no higher than 5 °C (41 °F)
NOTE: at the end of the work day (or not more than 24 hours from the time the container is opened), any remaining
milk must be discarded.
Dispensing with the Autosteam push-button strip(13)
1
Cleaning of steam nozzles
After each use:
- using a clean sponge, wash the outside with hot water removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as follows: turn the nozzle towards the cup tray and dispense
steam at least once, taking great care.
13
13
9a
1 ÷ 4
2
9a
dispensing.
13