Use; Connecting And Linking The Audio Signal; Connecting The Power Supply - dBTechnologies OPERA REEVO 212 Manual De Uso

English

USE

CONNECTING AND LINKING THE AUDIO SIGNAL

When linking the audio signal, connect the sound source to the "INPUT" of the first speaker first of all. Then
connect a balanced XLR cable from the "LINK" output of the first speaker to the "INPUT" of the second, and so on.
Repeat this step for all the speakers in the chain.
AUDIO
SOURCE

CONNECTING THE POWER SUPPLY

Connect the power cable provided to the MAINS INPUT socket, and then to the mains supply and turn the power
switch ON. The Limiter LED will flash briefly. Switch the speaker OFF before disconnecting the power cable.
CAUTION!
• Check that the power supply voltage indicated corresponds to that in the country of use
OPERA REEVO
POWER
POWER
SUPPLY
SUPPLY
Cod. 420120426 REV. 1.0
25