Mounting The Tool Tray (Optional) - Fronius Exento Highvac Manual De Instrucciones

5.2 Mounting the tool tray (optional)

Pos. Description
4 Tool tray with cup holder
1. Attach the tool tray (Pos. 4) to the product as shown in the figure.
2. The two magnetic strips (Pos. 5) fix the tool tray (Pos. 4) in place
automatically.
42,0410,2733-01; 1502948-01
Fig. 19: Mounting the tool tray (optional)
Tab. 20: Mounting the tool tray (optional)
- 72 -
Pos. Description
5 Magnetic strip
EN