Adjusting The Planting Unit Load; Adjusting The Automatic Safety Release Function - Checchi & Magli BABY TRIUM Manual De Uso Y Mantenimiento

Adjusting the planting unit load

The adjustment unit is usually mounted in position (A).
Setting the unit to position (A) decreases the weight on
the packing wheels.
A
C
UN41 0182FH
Proceed as outlined below.
1) With reference to the adjustment unit position, turn
the handwheel (C) clockwise or anticlockwise to in-

Adjusting the automatic safety release function

UN41 0183MG
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er jams).
The device, installed on each planting unit, is already set
by the manufacturer during the testing stage, but can be
adjusted by the user according to requirements.
English language
ADJUSTMENT INFORMATION
Setting the unit to position (B) increases the weight on
the packing wheels.
B
crease or decrease the load of the packing wheels on
the ground.
A
For adjustments, proceed as outlined below.
1) Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
Turn the ring nut (A) anticlockwise to decrease the
release resistance (i.e. more sensitive).
24
5
Use and maintenance