Fitting The Auping Mattress; Preparing For Use; Tips For Use - Auping AVS 455 Manual De Instrucciones

3.7 Fitting the Auping mattress*

• Put your bed in the horizontal position.
• Make sure that the five protruding
clip-on pins
connectors are pushed widthways
into the mesh (see fig. 2).
• 'Click' the mattress connectors into
the mesh at the positions indicated
(see fig. 2).
• Make sure
connectors are not directly above a
cross bar.
• Put the mattress on the mesh base
and centre it.
GB24
of the mattress
that the mattress
type 455/466
fig. 2

3.8 Preparing for use

•Check that the mesh base can move
freely. Only adjust the mesh base while
it is in a horizontal position, securely
fixed to the supporting legs, or to the
supports provided within the bed
surround.
• Check that the mattress is attached
to the mesh base properly.
• Insert the plug into the wall socket.

3.9 Tips for use

A new mattress has a certain amount of
rigidity, which will disappear within a few
days. Consequently, your mattress will
not optimally follow the contours of the
mesh base when it is initially adjusted.
We therefore recom mend that you lie
down on the mattress while adjusting
the positions for the first time.
* Indien van toepassing.