Mute; Vibration; Positioning The Reading Line; Standby - Optelec Compact 6 HD Manual Del Usaurio

Optelec Compact 6 HD & Compact 6 HD Speech

Mute

This menu item allows you to enable or mute the feedback sounds. By default, sound is enabled.

Vibration

This menu item allows you to enable or disable the vibration feedback. By default, vibration is
enabled.

Positioning the reading line

This menu item enables you to change the reading line position to one of its six positions; horizontal
top, horizontal center, horizontal bottom, vertical left, vertical center, vertical right. By default, the
reading line is horizontally set to the centre of the screen.

Standby

The standby time sets the time after which the Compact 6 HD goes into standby mode to conserve
power. Pressing any button will take the unit out of standby mode. By default, the standby time is
set to 10 minutes after no button is pressed or no movement of the Compact 6 HD is detected.

Button bar

This menu item enables you to change the button bar position to one of its three positions, auto,
bottom or side. Depending on your preference, you could change the position of the button bar to
the bottom or side of the screen.
45 English