Faber INLX21SSV2 Instrucciones De Instalación Información De Uso Y Cuidado página 23

CARING FOR FILTERS
CLEANING METAL GREASE FILTERS
The metal grease filters can be cleaned in hot detergent solution or washed
in the dishwasher.
They should be cleaned every 2 months use, or more frequently if use is
particularly heavy.
Open the Panel by pulling it down.
1
Remove the filter, pushing the lever
towards the back of the unit while
pulling downward.
Wash the filter without bending it.
2
Leave it to dry thoroughly before
replacing. If the surface of the filter
changes color over time, efficiency
will not be affected.
To replace the filter, push the filter up
3
into position while holding the lever
back, then release lever to lock in
place.
NOTES:
• Cleaning in a dishwasher may dull the finish of the metal grease filters.
• Ensure that the filters are completely dry before installing them back into
the Range Hood.
CLEANING EXTERIOR SURFACES
Please note, abrasives and scouring agents can scratch range hood finishes
and should not be used to clean finished surfaces.
Stainless Steel finish cleaning instructions:
Clean exterior surfaces with a commercially available stainless steel cleaner.
23