Install Instruction; Before First Use; Ambient Temperature - Teka Rbf 73385 Fi Manual De Usuario

6
EN

INSTALL INSTRUCTION

Before first use

Remove the exterior and interior packing, wipe the outside thoroughly with a soft dry cloth and
the inside with a wet, lukewarm cloth.
Before connecting your refrigerator to the power supply, check that the voltage stated on the
rating label of your appliance corresponds to the voltage in your home. A different voltage could
damage the appliance.
The appliance must be grounded. The manufacturer is not responsible for damages that may
occur as a result of usage without grounding.
space requirement diagram
A
540
Notice: All dimensions in mm

Ambient Temperature

Depending on the climate class, this
refrigerator is intended to be used at an
ambient temperature range as specified in
the following table.
The product may not operate properly at
temperatures outside of the specific range.
You can find the climate class on the
product label.
ATTENTION
The cooling performance and power consumption of the refrigerator may be affected by the ambient
temperature, the door-opening frequency, and the location of the refrigerator. We recommend adjusting the
temperature settings as appropriate.
B
E
A
B C
1785 510
C
D
D E
550 1770
climate class Ambient Temperature
SN +10 °C to +32 °C
N +16 °C to +32 °C
ST +16 °C to +38 °C
T +16 °C to +43 °C
If you have any doubts regarding installation, please
turn to the vendor, to our customer service or to the
nearest Authorised Service Centre.
Install Instruction
B
F G
992 620.5