10
EN
6.
Remove the the upper hinge of freezer door and plug pin.
7.
Remove the freezer door, the bottom hinge and the hole caps.
8.
Exchange the F:bottom hinge and F:upper hinge ,then install them according to below steps,
and install the top hole cover and lower hole caps
9.
Remove the two fixed blocks of freezer door and rotate them for 180° and install them on
other side of freezer door.
F:Bottom hing
Upper hing
F:Upper hing
Install Instruction
Hole cap
F:Bottom hinge
Hole cap
Fixed block
Hole cap