Modifying The Sound In Real Time - Roland Fa 06 Inicio Rápido

Synthesizer (Performing)

Modifying the Sound in Real Time

Modifying the Sound by Moving Your Hand (D-BEAM Controller)
1.
Press a button to select the effect that the D-BEAM controller will have.
Button
[SOLO SYNTH]
[EXPRESSION]
[ASSIGNABLE]
2.
While playing the keyboard, place your hand above the D-BEAM controller.
An effect is applied according to the button that you pressed.
Changing the Pitch in Real Time (Pitch Bend)
1.
Move the pitch bend/modulation lever to left or
right.
While playing the keyboard, move the lever toward the left to
lower the pitch, or toward the right to raise the pitch.
Using an Assigned Function to Vary the Sound ([S1] [S2] buttons)
1.
While playing the keyboard, press the [S1] [S2] buttons.
The sound changes according to the functions that are assigned to the [S1] [S2] buttons.
14
Explanation
Play a monophonic synthesizer by moving your hand above the D-BEAM controller.
Use the D-BEAM controller to control volume.
Various parameters and functions can be assigned.
The effect that's most appropriate for each tone is applied.
Hold down the [SHIFT] button and press this button to access a screen where you can assign a
function.
You can also assign a parameter by holding down the [ASSIGNABLE] button and turning the SOUND
MODIFY knob or pressing a pad.
Adding Vibrato or Dynamics (Modulation)
1.
Move the pitch bend/modulation lever away from
yourself.
Moving the lever away from yourself applies vibrato or
dynamics.