Sector S-03 Manual Del Usuario página 9

nd
enu
One touch on
Call Connection
to activate the
Bluetooth call.
If call not
activated,
the microphone
is all white and
empty
One touch on
Brightness
If turn off "do not disturb"
mode, it will turn grey.
PHONE CONNECT:
Press the microphone icon and from white (not activated) it will turn to
blue striped (active), then connect manually from the phone to S-03
CALL.Once the BT connection is established, the icon will turn all blue.
BRIGHTNESS:
Press SUN icon for the brightness and you may select 3 different level.
DO NOT DISTURB MODE:
Press the "moon" icon: if active the icon will be white colour while if not
active the icon will be grey.
IDLE ALERT:
Press the "sitting" icon: if active the icon will be white colour while if not
active the icon will be grey.
After activating the call,
the microphone icon will
show blue stripes and the
BT symbol inside.
Connected
S03 CALL
Idle alert is ON
Idle alert is ON
4
After successfully
connected the Bluetooth
CALL, it will show fully
blue icon. You can
connect Bluetooth Call
in the BT list from your
Connected
phone, named S-03
CALL
One touch ON Idle alert,
Touch again OFF
Idle alert is OFF