Connection Diagrams; Loudspeaker Settings; Preparing The Installation - Bose Professional Designmax Dm3C Guia De Instalacion

BoseProfessional.com
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM3C loudspeaker is designed to work with 18 AWG (0.8 mm

Connection Diagrams

Expose six millimeters (1/4 inch)
of bare wire to attach to the
terminals.

Loudspeaker Settings

Preparing the Installation

Using a Safety Cable
Some regional construction codes require the use of a secondary method of securing loudspeakers to support structures
to provide additional safety. Choose a mounting position, method, and hardware consistent with local building codes and
regulations.
Bose Professional recommends using (1) a safety wire or (2) a safety cable as a secondary securing mechanism. See the
diagrams below for safety attachment points.
Follow the manufacturer's instructions for any secondary securing mechanism implemented.
qw
Installation Guide • DesignMax DM3C
70V/100V
3W 6W
6W 12W
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
) to 14 AWG (2.1 mm ) size wire only.
2 2
8Ω
70V
12W
25W
100V
** NC: No Connection (do not use)
Setup
25W*
8Ώ
NC*
English • 5