Fitting The Welding Torch; Safety; Installing The Ptw - Fronius Ptw 1500 Pap Manual De Instrucciones

Fitting the welding torch

Safety

Work that is carried out incorrectly can cause serious injury and damage.
▶
▶
An electric shock can be fatal.
Before carrying out any work on the welding torch:
▶
▶
▶
Installing the
1
PTW
IMPORTANT! Insert the tungsten electrode so that the tip protrudes approx. 10 mm out
of the torch body. Slightly tighten the torch cap so that the tungsten electrode can still
move inside the torch body.
18
WARNING!
All connections must be made by trained and qualified personnel in compliance with
the relevant safety regulations.
Note the safety rules in the operating instructions.
WARNING!
Turn the mains switches of the power source and plasma device to the "0" position
Disconnect the power source and plasma device from the mains
Put up an easy-to-understand warning sign to stop anybody inadvertently switching
them back on again
2
3