Alternatives For Installation; Preparation For Installation - Bertazzoni Ref30Bmb N Serie Manual De Instalación

Ladder
Ø 2.4 drill bit
Ø 8.0 drill bit
Box cutter
Safety gloves
Tape measure
Phillips-head bit
¼" hex bit
Bubble level
Appliance dolly
Tape

2.7 Alternatives for Installation

The appliance can be installed in a variety of
ways depending on the kitchen design. It must be
installed in a location where it is certain that the
door can be opened and closed properly. If the
doors cannot open up to at least 90 degrees the
appliance drawers will not be able to be opened.
• Single-fridge cabinet placement methods
• Dual-fridge cabinet placement methods

2.8 Preparation for Installation

The instructions below refer to a built-in
installation.
In a built-in installation, the appliance is installed
in a cabinet niche or framed in with panels.
Niche Dimensions
• The niche dimensions below must be checked
before beginning the installation.
EN
9