Getting Started; Charging Exogen - Bioventus Exogen Guia Del Usuario

Getting Started

Charging EXOGEN

EXOGEN has a rechargeable lithium-ion battery. A fully-charged battery delivers approximately five 20-minute treatments.
It takes about 5 hours to fully charge a discharged EXOGEN battery.
WARNING: To avoid the risk of electric shock, EXOGEN must only be connected to a supply mains with protective earth
(a 3-prong electrical outlet). Do not use any adapters or extension cords to charge EXOGEN. Only plug the charger into
an UL listed electrical outlet.
Charge EXOGEN before you begin a treatment or turn EXOGEN on. Follow the steps below to charge EXOGEN:
USB Cover
(closed)
1. Find the USB cover on the left side
of EXOGEN.
Battery status
Charging symbol
4. You will see the charging symbol
(white lightning bolt) and battery
status symbol flashing in the corner
of the screen. This lightning bolt
charging symbol tells you EXOGEN
is charging. Charge EXOGEN until
a fully-charged battery is shown
by the battery status. (Figure 6)
5
Pull down at
tab to open
USB Cover
(open)
2. Pull the tab down to open the USB
cover.
5. When charging is complete, remove the
USB plug from EXOGEN, close the USB
cover and unplug the charger from the wall.
USB plug of charger
3. Plug the end of the charger into an
electrical outlet. Plug the USB plug
end of the charger into the USB port.