Fixing The Surround - Dometic Rtx2000 Instrucciones De Instalación

CoolAir RTX1000, RTX2000
I
NOTE
Place the fuse holder no more than 0.3 m from the positive terminal of
the battery.
➤ Connect the power supply positive lead (red) to the battery positive
terminal as illustrated via a 40 A fuse.
➤ Connect the voltage monitor positive lead (red) to the battery positive
terminal as illustrated via a 2 A fuse.
➤ Connect the wiring loom to the unit and fix with a cable tie in a suitable
position (fig. a 2.).
6.8

Fixing the surround

A
NOTICE!
Tighten the screws carefully in order not to damage the surround.
➤ Fix the surround in place as illustrated (fig. b).
The surround is fixed in the same way as the original sunroof
surround.
EN
Installation
13