Tabla De Contenido; General Information; Hazard Statements; Notes - Grundfos Control MPC Serie Manual De Instrucciones

English (GB) Installation and operating instructions
Original installation and operating instructions
These installation and operating instructions describe Grundfos
Control MPC.
CONTENTS
1. General information
1.1 Hazard statements
1.2 Notes
2. Receiving the product
2.1 Transporting the product
2.2 Lifting the product
3. Installing the product
3.1 Location
3.2 Mechanical installation
3.3 Electrical installation
4. Starting up the product
5. Product introduction
5.1 Product description
5.2 Applications
5.3 Identification
6. Overview of control variants
7. Operating panel
7.1 Display
7.2 Buttons and indicator lights
8. Functions
8.1 Tree of functions
8.2 Overview
8.3 Description of functions
8.4 Status (1)
8.5 Operation (2)
8.6 Alarm (3)
8.7 Settings (4)
8.8 Data communication
9. Servicing the product
9.1 Maintaining the product
9.2 CU 352
10. Fault finding
11. Taking the product out of operation
12. Technical data
12.1 Temperature
12.2 Relative humidity
12.3 Electrical data
12.4 Measuring parameters
13. Related documents
14. Disposing of the product
Read this document before installing the product.
Installation and operation must comply with local
regulations and accepted codes of good practice.
4

1. General information

1.1 Hazard statements

The symbols and hazard statements below may appear in
Grundfos installation and operating instructions, safety
instructions and service instructions.
Page
4
DANGER
4
Indicates a hazardous situation which, if not avoided,
4
will result in death or serious personal injury.
5
5
5
WARNING
5
Indicates a hazardous situation which, if not avoided,
5
could result in death or serious personal injury.
5
5
CAUTION
5
Indicates a hazardous situation which, if not avoided,
6
could result in minor or moderate personal injury.
6
6
The hazard statements are structured in the following way:
7
SIGNAL WORD
12
Description of hazard
13
14 Consequence of ignoring the warning.
14 - Action to avoid the hazard.
15

1.2 Notes

15
The symbols and notes below may appear in Grundfos
17
installation and operating instructions, safety instructions and
19
service instructions.
19
23
28
Observe these instructions for explosion-proof
30
products.
74
76
76
76
A blue or grey circle with a white graphical symbol
76
indicates that an action must be taken.
77
77
77
A red or grey circle with a diagonal bar, possibly with
77
a black graphical symbol, indicates that an action
77
must not be taken or must be stopped.
77
78
78
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.