Ardea Mobility 200 Manual De Instrucciones página 52

18
INSTALLING THE BATTERY UNIT
• Connect the motor to the battery pack as in
connector.
(Fig. 12) (illustrative image)
SLOPING THE HANDLEBAR
• Loosen the handlebar adjustment knob and lift the handlebar
• When the desired position is obtained, tighten the handlebar adjustment knob.
(Fig. 13) (illustrative image)
Follow the instructions below to position the handlebar as desired:
• Grip a handle with one hand;
• Loosen the handlebar adjustment knob with the other hand;
• Position the handlebar in a comfortable driving position;
• Tighten the handlebar adjustment knob.
WARNING!
Make sure that the knob is firmly screwed into the desired position.
REPOSITIONING THE BASKET
• Reposition the basket on the handlebar
(Fig. 12) paying attention to the direction of the
Basket
Adjustment
knob
(Fig. 12).
(Fig. 13).