Maintenance And Cleaning - Olimpia Splendid Peler 6C Instrucciones Para La Instalación, Uso Y Mantenimiento

4 - MAINTENANCE AND CLEANING

Before proceeding with any maintenance
and cleaning intervention, always make
sure you disconnected the power plug
from the power socket.
Do not use water to clean the internal parts of the appliance;
risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance
in case it's very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic
surface.
4.1.b - Cleaning the filters
Operate as follows:
a. Use a Phillips head screwdriver (not included) to remove the screws (22) (fig.N).
b. Remove the filter support (15) from the body of the appliance (fig.O).
c. Slide out from the support (15) the paper filter (17) and the air filter (16).
d. Clean both filters (16 and 17) with water and neutral soap. Rinse the filters
well with clean water.
e. If necessary, use a soft brush to clean the air filter more deeply (16).
f. Let the filters dry, then replace them into their support (15).
EN - 20
PELER 6C