LG PQDSBC1 Manual De Instrucciones página 19

n Monitoring fan and error status : Refer to below and
Connect to the control device that you want to control.
1) Turn on the 3 rd switch of SETTING_SW.
2) Set CONTROL_MODE_SW to F.
FAN Display
When using local supply, do not use high voltage over than AC 24 V.
Local Supply
Power
AC or DC
(Depends on Operation
display power type)
Setting and using method
Local Supply
Power
Error Display
AC or DC
(Depends on Error
display power type)
Installation Manual 19