The Rear Ports - Atlantis Land MIMO A02-AP2-W54M Guia De Inicio Rapido

1.7 The Rear Ports

Porte
POWER (DC-IN)
LAN
Reset
Reverse SMA Connector
Meaning
Connect the Power Adapter DC plug to the AP's
power jack.
Ethernet port with 10/100Mbps Fast Ethernet
connections, connect this port to switch/hub.
If AP is power on:
•
Press reset button for 2/3 seconds;
device will reboot (release reset
button when LED STATUS turn off).
•
Press reset button until the device will
reboot ( LED STATUS turn off), only
when LED STATUS will start to blink,
release reset button. Now, the AP will
reboot with factory default settings.
Screw antennas without force them.
ENGLISH
28