Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
About the temperaturecontrols,
gecom
The temperature controls are preset in the factory at5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Ak FlowSystem
The
Pettbm_ance
:Mr How
System
is designed
to maximize
temperature
control
in the
reliigerator
and
fl'eezer
compartments.
This
unique
spedal
feature
consists
of the _di" Tower
ah)ng
the
back
wall of the
reiiigerator
and
the
_dr Tunnel
on the bottom
portion
of the
fl'eezer
rear
wall. Placing
fi_od in fl'ont
of the
h)tl\'e_
on these
components
will not affect
pe_kmnance.
_dthough
the
_dr Tower
and
the _dr Tunnel
can
be removed,
doing
so will affect
temperature
perfkmnance.
(For removal
instructions,
on-line,
24 horus
a
day, contact
us at ge.com
or call 800.(;E.(:ARES.
In Canada,
contact
us at _vw.geappliances.ca
or call
1.800.361.3400.)
Publicidad
Tabla de contenido
