How To Install - Lionelo Neal Manual De Usuario

10.
Never leave the child in the child safety seat in the vehicle unattended.
11.
Any luggage and similar objects should be secured to prevent injuries in the case of
any collision.
12.
Do not use the child safety seat without its fabric upholstery.
13.
The upholstery must not be replaced with the one from an alternative system. It
constitutes an integral component of the system and affects the restraint system
function.
14.
Always take this user manual with you. Keep the user manual throughout the entire
product life.
15.
Read the user manual provided by the vehicle manufacturer.
PRODUCT OUTLINE (fig. 1)
1.
Adjustable headrest
2.
Headrest adjustment
3.
Shoulder belt guide
4.
Hip belt guide
5.
Car seat base
6.
Inclination adjustment lever
7.
ISOFIX arms
8.
ISOFIX release key
9.
ISOFIX control light
10.
ISOFIX fastening spots

HOW TO INSTALL

If the car seat cannot be installed with the use of ISOFIX fastening spots in the vehicle,
ISOFIX fasteners may remain hidden inside the car seat, and the car seat may be therefore
installed solely with the use of three-point safety belts.
By installing the child safety seat on the front seat of the vehicle, make sure the backrest of
the vehicle seat is in vertical position.
With three-point safety belts and ISOFIX fasteners
1.
Place the child safety seat inside the car. Grip and pull ISOFIX release key to pull ISOFIX
arms out (fig. 2). ISOFIX arms work properly when you pull them out fully.
2.
Press ISOFIX fasteners against ISOFIX fastening spots in the vehicle (fig. 3). Make sure
all ISOFIX control lights are GREEN (fig. 4). Press the child restraint system against the
vehicle seat backrest as much as you can.
3.
Put the child in the car seat.
EN ‑ 6 ‑