Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Allen + Roth 5989606 Manual De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
9. Install three 60-watt max. standard-base
incandescent bulbs (not included) or CFL/LED
equivalent.
WARNING: When replacing bulbs, allow
bulbs and shades to cool down before touching.
Restore power and test fixture (A).
If lights do not function, please refer to
TROUBLESHOOTING below.

CARE AND MAINTENANCE

• Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive
cleaner.

TROUBLESHOOTING

WARNING: Before beginning work, shut off the power supply to avoid electrical shock.
PROBLEM
Bulb(s) will not light.
Fuse blows out or
circuit breaker trips.

WARRANTY

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for one (1)
year from the date of purchase. If within this period the product is found to be defective, take a copy of the
bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The
distributor will, at its option, repair, replace or refund the purchase price to the consumer. All costs of
installation and removal of the fixture is the responsibility of the consumer. This warranty does not cover
fixtures becoming defective due to misuse, accidental damage or improper handling and/or installation and
specifically excludes liability for direct, incidental or consequential damages, improper packaging of returned
products and acts of God. As some states do not allow exclusions of limitations on an implied warranty, the
above exclusion and limitation may not apply. This warranty gives you specific rights and you may also have
other rights which may vary from state to state.
KHLI2406
POSSIBLE CAUSE
1. Bulb(s) is/are burned out.
2. Power is OFF.
3. Faulty connection.
1. Crossed wires.
2. Power wire is grounding out.
9

CORRECTIVE ACTION

1. Replace light bulb(s).
2. Make sure power supply is ON.
3. Check wiring and all connections.
1. Check wiring.
2. Check all connections.
9
Bulb
(representative
only)
Printed in China/Cambodia
A

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Vb230-3ch

Tabla de contenido