NETGEAR EX3110 Quick Start Guide página 6

8. On your computer or mobile device, find and connect to a
new extender WiFi network.
The extender creates two new extender WiFi networks.
The extender's new WiFi network names are based on your
existing WiFi network name, with _2GEXT and _5GEXT at
the end of the name.
For example:
• Existing WiFi network name. MyNetworkName
• New extender WiFi network names.
MyNetworkName_2GEXT and MyNetworkName_5GEXT
Use the same WiFi password that you use for your WiFi router.
9. Test the new extender WiFi range by moving your computer
or mobile device to the area with a poor router WiFi signal:
a. Leave your computer or mobile device in the area with
a poor router WiFi signal and return to the extender.
b. Check the Device LED on the extender:
•
•
If the Device LED is solid green or amber, your new
extender WiFi network reaches the area with a poor
router WiFi signal and your network setup is complete.
If the Device LED is red, your new extender WiFi
network does not reach the area with a poor
router WiFi signal.
You must move your computer or mobile device
closer to the extender until the Device LED turns
solid green or amber.
6