NETGEAR EX3110 Quick Start Guide página 5

3. If your WiFi router supports the 5 GHz band, repeat Steps 1
and 2 to connect the extender to the 5 GHz band.
4. Unplug the extender and move it to a new location that is
about halfway between your router and the area with a poor
router WiFi signal.
DO
The location that you choose must be within the range of
your existing WiFi router network.
5. Plug the extender into an electrical outlet and wait for the
Power LED to light green.
6. Use the Router LED to help you choose a spot where the
extender-to-router connection is optimal.
7. If the Router LED doesn't light amber or green, plug the
extender into an outlet closer to the router and try again.
Keep moving the extender to outlets closer to the router
until the Router LED lights amber or green.
DON'T
5