Adjusting Fox Shock - Orbea Blue Paper Rise Hydro 2023 Manual Tecnico

122 | ORBEA
MARZOCCHI AND FOX FORK REBOUND
ADJUSTMENT SUGGESTIONS
FOX 36 FLOAT RECOMMENDED REBOUND ADJUSTMENT
Weight of rider Weight of rider + gear
+ gear (kg) (lb)
54-59 120-130
59-64 130-140
64-68 140-150
68-73 150-160
73-77 160-170
77-82 170-180
82-86 180-190
86-91 190-200
91-95 200-210
95-100 210-220
100-104 220-230
104-109 230-240
109-113 240-250
FOX AND MARZOCCHI FORK COMPRESSION
ADJUSTMENT SUGGESTIONS
Fox recommends starting with a standard high- and low-
speed compression setting, then progressing to adjusting
the high- and low-speed compression dials according to
Turn the compression dials to the closed position (turn ful-
MARZOCCHI BOMBER Z2 FORK COMPRESSION
SETTING
The cartridge has three compression setting positions:
Open position and using the other positions according to
TECHNICAL MANUAL
FOX 36 GRIP 36 GRIP2
LSR
(clicks)
(clicks)
13 9
12 8
11 7
10 7
9 6
8 6
7 5
6 4
5 4
4 3
3 2
2 2
1 1
FOX 34 FLOAT FIT4 FORK COMPRESSION
ADJUSTMENT
The 3-position cam (Open, Medium, Firm) is useful for
Open for demanding descents, Medium for undulating ter-
Fox recommends starting in the Open position and using
· Open mode micro-adjustment.
Open mode allows a 22-position adjustment to achieve the
FOX 36 GRIP FORK COMPRESSION ADJUSTMENT
- The 3-position cam (Open, Medium, Firm) is useful for
B LUE PAP ER R I SE · H YD R O 2 02 3
Fox recommends starting in the Open position and using
HSR
(clicks)
diate positions between the three settings Open, Medium
8
7
FOX 36 GRIP2 FORK COMPRESSION ADJUSTMENT
6
6
Fox recommends starting with a standard high- and low-
speed compression setting, then progressing to adjusting
5
the high- and low-speed compression dials according to
5
4
3
3
2
ADJ USTING FOX SHOC K
1
1
MANUFACTURER'S MANUALS
0
Fox Float DPS and Float X shocks manual
FLX FLOAT DPS AND FLOAT X SHOCK AIR
PRESSURE ADJUSTMENT SUGGESTIONS
The following tables give approximate values, they may
Recommended SAG
measurement
Equivalent in mm of SAG 25%
in 210x55 shock
Equivalent in mm of SAG 30%
in 210x55 shock
-
RECOMMENDED HIGH SPEED
COMPRESSION (HSC) SETTING
RECOMMENDED LOW SPEED
COMPRESSION (LSC) SETTING
Adjust the shock absorber air pressure until you reach the
you've reached your target SAG, adjust the rebound accord-
or compression dial to the closed position (turn fully clock-
Use the SAG meter included in the Rise linkage
preload tool to set a 30% SAG on your shock.
25% - 30%
13.75 mm
16.5 mm
ORBEA | 123
E N
5 clicks
10 clicks