Resetting The Usb Receiver - Bamboo Clavier Manual Del Usuario

RESETTING THE USB RECEIVER

A USB receiver is a small receiver inserted into a USB port that sends and receives the wireless signal
with the mouse or keyboard. Each receiver is configured to communicate automatically with the
devices that have been associated with it. The USB receiver does not interfere with other wireless
devices and can not work with them.
The USB receiver is inside our products, in the battery compartment.
RE CON F I G U R AT I ON OF T H E K EY B O A R D
STEP 1
Press the "esc" key and the "+ =" key simultaneously on your keyboard.
The red indicator lights up.
STEP 2
Insert the USB receiver into one of the ports on your device.
(note: your computer may take a few moments to configure the new device)
ST EP 3
Once the connection is established, the indicator light turns off and you can now use your
product.
If you do not insert the USB receiver 10-15 seconds after performing step 1, the "connection"
mode expires, then return to step 1 to restart the configuration.
If the USB receiver and your product work properly, but the indicator light tends to
blink, the batteries in your device need to be replaced.
15