Thinklabs One Manual Del Usuario página 11

a
0 Hz
0 10
+
Start with One in the Power Off condition.
1. Turn Power On by firmly clicking any key.
a
2. Click key once for each minute of the desired auto shutoff time.
For example, click
3. Push and HOLD
i
▪ Factory Default = 2 minute auto shutoff time.
▪ Allowable range is one to ten minutes (1 - 10 clicks).
▪ To DISABLE Auto Shutoff (unit stays on), do 12 Clicks in step 2 above.
4. Checking Battery Level
To check Battery Level:
1. Push any key to Power On.
2. Push and Hold
3. Battery Level flashes across 0-10 Scale before One powers off.
The further to the right the LEDs light up, the higher the charge.
i
Typical battery life in use ~ 240 minutes active listening.
Standby/Power Off time > 4 weeks.
5. Setting Auto Shutoff Time
a
key 3 times for a 3 minute shutoff time.
a
key until One shuts off (~15 seconds).
a
and simultaneously for two seconds.
9