Charging The Battery - Simate S3 Manual De Usuario

V. Charging the Battery:
1. Plug the charger's power cord into the power socket.
2. Insert the charger's charging plug into the charging port on the scooter
and controller.
3. When the charger's indicator light turns from red to green, the battery is
fully charged.
4. Do not use other models or brands of batteries, as it may pose a safety risk.
5. Avoid touching the battery contacts, disassembling, or puncturing the
casing. Avoid metal objects contacting the battery contacts to prevent
short circuits. This could cause damage to the battery or injury.
6. Improper disposal of used batteries can severely pollute the environment.
Discard the battery pack according to local regulations. Do not dispose of
this battery arbitrarily, let's protect our environment together.
7. Do not place the battery in a high temperature above 50C or a low
temperature below -20C environment (for example, do not leave the scooter
or its battery in a car exposed to the sun in summer), and do not throw the
battery into fire, as it may lead to battery failure, overheating, or even
fire risk.
8.Only use the original charger for charging, otherwise, there is a risk of
damage or fire.
9. Do not disassemble the charger casing by yourself. Avoid touching the
interface contacts with metal objects when powered on, as it may cause
electric shock or charger damage, and such damage is not covered by
the warranty.
05