Daily Maintenance And Care; Cleaning And Storage; Battery Maintenance - Simate S3 Manual De Usuario

VI. Daily Maintenance and Care:

Cleaning and Storage

Wipe the main frame clean with a soft damp cloth. If there are stubborn
stains, apply toothpaste and scrub repeatedly with a toothbrush, then clean
with a soft damp cloth.
If there are scratches on the plastic parts of the body, they can be polished
with fine sandpaper.
Tips: Do not use alcohol, gasoline, kerosene, or other corrosive, volatile
solvents to clean your scooter. These substances may damage the
appearance and internal structure of the scooter. Do not use pressure
washers or hose sprays.
Warning: Before cleaning, make sure the scooter is turned off and the
charging cable has been unplugged, and the rubber cap of the charging
port is tightly fastened, otherwise, it may damage the electronic
components. When not in use, store the scooter in a cool, dry place. Do not
leave the scooter outdoors for extended periods. Sun exposure and
extreme temperature conditions (overheating and overcooling) will
accelerate the aging of plastic parts and may reduce battery life.

Battery Maintenance:

When storing or charging the battery, do not exceed the specified
temperature limit (please refer to the model parameter table). Do not
puncture the battery. Please refer to the laws and regulations in your
area regarding battery recycling and/or disposal.
Maintaining a well-maintained battery can keep it running well even after
many miles of travel. Please charge the battery after each ride and avoid
completely depleting the battery. At normal temperatures of 22C, the
battery's endurance and performance are optimal. However, when used in
conditions below 0C, the battery's endurance and performance may
decline. Generally speaking, the same battery at -20C has only half the
endurance and performance of 22C. The battery's endurance will recover
as the temperature rises.
06