LEPULSE Smart Body Fat Scale Manual De Usario página 9

Preparation before Measuring
1. Remove the protective film on the scale surface and install the
batteries.
2. Place the scale on a flat, hard surface. Carpeted or uneven floors
may affect accuracy.
3. Gently step on the scale to wake it up, and step on the scale again
to start measuring after the screen shows "0.00".
Note: Please be sure to calibrate before use, otherwise you will
get inconsistent readings every time you step on.
Calibrating the scale
① Place the scale on a hard, flat surface.
② Step on the scale with one foot until
the readings appear on the screen.
③ Step off the scale. It will show "0.00",
indicating that the calibration process is
complete.
7