Install Batteries - Lepulse Smart Body Fat Scale Manual De Usario

Overview

Install batteries

① Press the battery cover with your thumb and push it up to remove
the battery cover.
② Insert the batteries. Be sure the polarity of the batteries is placed
correctly. (If there are batteries in the scale, please remove the
insulating strip.)
③ Put the battery cover back and push it down to the bottom.
Set unit of measurement
When using the body fat scale without

running App, you can switch units by
pressing the "UNIT" button inside the
battery compartment.
When connected to the App, the unit of the

scale will be synchronized with the unit on
the App, please convert the unit on the App.
Accuracy range
50kg: ± 0.3kg
110lb: ± 0.66lb
①
100kg: ± 0.4kg
220lb: ± 0.88lb
4
②
UNIT: kg / lb / st
180kg: ± 0.5kg
396lb: ± 1.1lb