Air Intake Filter - Black And Decker Bced26 Manual De Instrucciones

CARE AND MAINTENANCE

AIR INTAKE FILTER

The air intake filter should be cleaned before or after each use. Refer to the chart
below to clean the air intake filter.
NOTE: Unplug the power cord before cleaning any part of the dryer.
1 Remove the air intake filter by pulling outward while holding the filter housing
by its top and bottom.
NOTE: The air intake filter must be installed when operating the dryer.
2 The air intake filter consists of two (2)
parts: filter housing and air intake filter.
3 Remove the air intake filter inside the
filter housing. Clean the filter using a
soft brush or a vacuum cleaner.
4 Reassemble the air intake filter inside
the filter housing, then reinstall the
filter housing by pushing the housing
upwards with your thumb until the
latch is secured to the dryer.
Page 18
Air Intake Filter