Uline H-129 Guia De Inicio Rapido

H-129, H-148
LABEL/TAPE
DISPENSERS
1. Release support arm rod from "J" notch in dispenser.
Slide support arms onto rod in pairs with knobs facing
each other. (See Figure 1)
Figure 1
2. Place rolls of labels or tape between support arms.
3" core adapters are included for large core rolls.
(See Figure 2)
Figure 2
PAGE 1 OF 3
1-800-295-5510
uline.com
INSTRUCTIONS
Support Arm Rod
Support Arm
J Notch
3" Core Adapters
3. Pull labels or tape forward and thread under
guide bar and over top flange of front wall.
(See Figure 3)
Figure 3
Thread Labels
Under Guide Bar
Tear
Strip
Para Español, vea página 2.
Pour le français, consulter la page 3.
Support Arm
0923 IH-129