π
H-185, H-186
PEANUT DISPENSERS
20 AND 40 CUBIC FEET
TOOLS NEEDED
Flat Head Screwdriver
RECOMMENDED HARDWARE (NOT INCLUDED)
Hook x 2
NOTE: Read instructions thoroughly. Remove
all components from box and locate all parts.
Remove pulley and U-bolt from rope.
INSTALLING PULLEYS
1. Attach pulleys to ceiling using hook or other secure
method.
2. Make sure one pulley is positioned directly above
the center of dispenser and the other clears the side
of bag so rope will not interfere when raising and
lowering bag. (See Figure 1)
3. Ensure rope tie-off method is in place (cleat, anchor,
post, etc.). (See Figure 1)
PAGE 1 OF 6
1-800-295-5510
uline.com
Pliers
Cleat x 1
PART
Capacity
Canvas Bag
Chain and Rope
Flex Tubing
Steel Rod
Valve Assembly
Clamp Ring
U-Bolt
Pulley
INSTRUCTIONS
PARTS
QTY
H-185
-----------
20 CU. FT.
1
✓
1
✓
1
✓
2
✓
1
✓
1
✓
1
✓
2
✓
Figure 1
Pulley
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
H-186
40 CU. FT
✓
✓
✓
✓
✓
✓
✓
✓
Pulley
Cleat
0521 IH-185