Use Of Remote Control - Coway Airmega Manual Del Usuario

02 PREPARATION

USE OF REMOTE CONTROL

14
1
Open the battery cover and replace the
battery.
How to open the battery cover: first press and
hold in the direction of arrow 1 in the figure to
release the upper snap of the battery cover, and
then pull it out in the direction of arrow 2.
When using, please align the position of the
receiver.
Hold and press the latch as shown in the left
digram to release the battery.
2
Remove the battery.
3
Please make sure to use the correct
coin battery, CR2032 3V.
When replacing the battery, please pay
attention to the polarity, and then put away the
battery cover.