Led Light - Parkside Pwca 20-Li A1 Guía Breve

LED light

NOTE
►
You can use the LED light as an additional light
source to illuminate small, dim areas. The LED light
may only be used as supplemental lighting.
Switching on
Press the ON/OFF switch 6 to activate the
♦
battery adapter 3. The indicator LED 7 lights up.
♦
Press the On/Off switch a second time to turn
on the LED light 1.
Switching off
Hold down the ON/OFF switch 6.
♦
The indicator LED 7 goes out after a short time.
PWCA 20-Li A1
GB │ IE │
11 ■