Symbols; Safety Warnings; Safety Instructions For Reciprocating Saws - Festool Rsc 18 Manual De Instrucciones Original

Contents
1 Symbols..................................................... 15
2 Safety warnings.........................................15
3 Intended use..............................................16
4 Technical data........................................... 16
5 Parts of the device.....................................17
6 Battery pack.............................................. 17
7 Transport and storage.............................. 17
8 Commissioning..........................................17
9 Settings......................................................17
10 Working with the electric power tool........19
11 Warning signals.........................................20
12 Service and maintenance..........................20
13 Accessories............................................... 20
14 Environment.............................................. 21
15 General information.................................. 21
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear a dust mask.
Wear ear protection.
Wear protective goggles.
Wear protective gloves.
Remove the battery pack.
Inserting the battery pack.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel­
evant regulations in the UK.
Tool contains a chip which stores data.
See section 15.1
Do not dispose of it with domestic
waste.
Tip or advice
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Safety instructions for reciprocating
saws
- Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
- Use clamps or another practical way to se­
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
2.3 Further safety instructions
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Use appropriate detection devices to look
-
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
English
15